| 1. | Thermal damage in insb detector induced by cw laser
型探测器的热损伤 |
| 2. | Simulating calculation of thermal damage of concrete dams
混凝土坝的温度损伤及损伤仿真计算 |
| 3. | Shield thermal damage resistance icon now matches all the other " thermal damage resistance " icons
护盾热能抗性的图标现在和其他的抗性图标相应。 |
| 4. | Shield thermal damage resistance icon now matches all the other " thermal damage resistance " icons
护盾热能伤害抵抗标志和其它“热能伤害抵抗”标志一致了。 |
| 5. | The investigations on withstanding thermal damages for roll shell in the metal thin strips produced with continuous roll casting
金属薄带铸轧辊套抗热损伤行为分析 |
| 6. | Special absorbency can bring grinding fluid to a polishing place , which reduces thermal damage for products and effectively lubricates
特殊吸水性，可将研削液带至加工处，降低产品热伤并有效润滑。 |
| 7. | A high steam temperature was adapted to raise drying rate at the meantime thermal damage of material can not be increased
因此，恒速段可使用更高的温度而不增加对物料的热损伤程度，而提高介质的温度可明显提高干燥速度。 |
| 8. | The above research results of theory and test make a contribution to the study on the thermal damage of the piston
上述试验和理论研究结果将为活塞热损伤的研究打下良好的基础，同时也为探索活塞热疲劳寿命预测提供了理论和试验手段。 |
| 9. | Abstract : this paper deals with the regularities of the thickness of thermal damage surface and effect of all of the mechanisms in edm of structural ceramics
文摘:研究了结构陶瓷电火花加工热影响层厚随脉冲参数变化的规律以及蚀除机理的各种分离方式作用效应的变化规律。 |
| 10. | Direct connect vias conduct so much heat away from the pin and into the plane that high temperature or long soldering time may be required to complete the joint - thermal damage could occur to both the board and the component from soldering or desoldering
在焊接时，直接连接的过孔会通过引脚把大量的热传导至内电层，因此完成焊接就需要很高的温度或者延长焊接时间，这就会导致在焊接或拆焊时发生电路板或元件的损坏。 |
